I have been working in the field of dry engineering excavation machines for ten years. My most profound realization is that for a good excavator, it must be paired with a reliable bucket. Especially in rock conditions, if the bucket fails, it can either delay the project schedule or damage one's reputation. Over the years, I have been involved in dozens of mining and infrastructure projects, and have used countless Excavator Parts. Just the excavator buckets alone have been replaced with over a dozen brands. It wasn't until two years ago when I started using the OEM Sany 650 excavator bucket from xiangyu baoyuan that I finally completely got rid of the annoyance of "frequent problems with the bucket". Today, I'm going to share my thoughts with my colleagues. Why do I always specify this bucket for any rock project now?
In the past, I chose the ordinary bucket just for the sake of saving money, and it was all a painful lesson.
During the years when I was in charge of the team, the boss always emphasized the need to control costs. When purchasing Excavator Parts, we could only choose the cheaper ones. Looking back now, those small savings were all exchanged for the costs of the construction period and maintenance. The most memorable incident was a outdoors mine project three years ago. We used an ordinary Sany 650 bucket for the operation, but less than half a month later, the side plate of the bucket was worn out by the rocks. What was even more disastrous was the bucket teeth. Within a few days, they became sharp and deformed. Even after replacing two batches of inferior brand bucket teeth, they still didn't work properly.
Later, we tried another bucket that claimed to be "wear-resistant". However, when lifting heavy rocks, the weld seam cracked directly, and all the stones in the bucket spilled out. To carry out emergency repairs, we not only had to urgently purchase new Excavator Parts, but also lost a full three days of construction time. The workers' overtime pay and project penalty fees alone amounted to a considerable amount of money. What's more frustrating was that some small manufacturers' bucket parameters did not match, and when installed on the Sany 650, either the digging force was insufficient or the steering was sluggish, which in turn affected the efficiency of the entire equipment. Since then, I have firmly believed in one principle: for excavator buckets, reliability is ten thousand times more important than price.
Xiangyu Baoyuan OEM Sany 650 excavator bucket can handle even the toughest rock conditions.
My first encounter with Xiangyu Baoyuan was through a recommendation from a colleague. At that time, we were about to launch a large-scale rock excavation project and needed a rock bucket compatible with the Sany 650 excavator. With a mentality of giving it a try,I ordered one, and as soon as I got it, I was completely amazed.
Let's talk about the material first. This OEM Sany 650 excavator bucket is made entirely of Q355B steel plates. The side plates and other key parts are additionally covered with wear-resistant plates, which are much thicker than the ordinary bucket's steel plates. During mining operations, when facing hard granite, the bucket can directly impact and dig without any pressure. After operating for three months, the side plates only suffered slight wear, which is much more durable than the ordinary bucket. Moreover, it is a specialized rock bucket type with a 4.5 cubic meter capacity and an 65-ton compatible tonnage, which perfectly matches the power output of the Sany 650 excavator. Each time it digs, it can fill the bucket with stones, and the efficiency has significantly improved compared to before.
The bucket teeth are simply outstanding. They are equipped with genuine ESCO bucket teeth (also known as Esco bucket teeth), and are enhanced with diamond castings, ensuring maximum wear resistance. Previously, we used ordinary bucket teeth and had to replace them once a week on average. Now, with this bucket's bucket teeth, it took over two months before any slight wear occurred, significantly reducing the frequency of replacement and maintenance costs. What's more remarkable is the welding process. It uses robot welding, with the weld seams forming a single piece. Not only is the appearance beautiful, but the strength is also beyond words. Once during an operation, the bucket accidentally hit a hard rock wall. At that moment, I was tensed and thought the weld seam might crack. However, after checking, I found no problems at all. The quality is truly solid.
In addition, its size is precisely matched. The bucket width is 2160mm and the bucket height is 2025mm. When installed on the Sany 650, it fits perfectly, and the operation is extremely smooth. There are no issues like lag or deviation as before. What's more considerate is that xiangyu baoyuan also offers personalized customization services. If there are special working conditions that require adjusting the bucket parameters, they can customize according to the needs. This is much better than many manufacturers that only sell standard parts.
xiangyu baoyuan offers a wide range of accessories, making project adaptation more convenient.
After using the OEM Sany 650 excavator bucket from xiangyu baoyuan, I also learned about their other products and found that they not only produce Excavator Parts, but also Tower Crane Accessories, Underground Loader Parts, Underground Transport Vehicle Parts and other full-range engineering accessories. Now, the engineering accessories for our project have mostly been replaced with those from xiangyu baoyuan. Whether it's the excavator's bucket or teeth, or the Underground Loader Parts and Underground Transport Vehicle Parts used in underground projects, the quality is very stable.
Last time, in an underground mining project, we used their Underground Loader Parts and Underground Transport Vehicle Parts, combined with xiangyu baoyuan's OEM Sany 650 excavator bucket for collaborative operation. The compatibility between the various components was extremely high, and the operational efficiency was directly increased by 20%. Moreover, during the past two years of cooperation with them, the service was particularly excellent. Whether it was consulting about the selection of Excavator Parts or subsequent after-sales maintenance, their technicians could respond promptly. Once in a remote mining project, a small problem occurred with the components, and after contacting the manufacturer, they sent someone to solve the problem the next day, without causing any delay to the construction schedule.
Sincere advice for engineers and purchasers
Finally, I'd like to tell my colleagues something honest: when choosing excavator buckets (such as Excavator Parts), you really can't skimp on the price. A reliable bucket can help you save time, reduce maintenance costs, and avoid operational risks. These benefits are far more important than the money you spend upfront. Especially in harsh conditions like rock formations, the quality of the bucket directly determines whether the project can proceed smoothly.
If you are choosing a bucket for the Sany 650 excavator, or need to purchase engineering accessories such as Tower Crane Accessories, Underground Loader Parts, Underground Transport Vehicle Parts, etc., I sincerely recommend that you take a look at the brand xiangyu baoyuan. Over the past two years of using their products, I have never been let down by their quality, compatibility, or after-sales service.
I have compiled the operation data of the Sany 650 excavator bucket using xiangyu baoyuan OEM in the past two years and the usage experiences under different working conditions into a selection guide. If you want to know the specific operation performance of this bucket or have any questions about engineering component selection, you can leave a message below. I will share my practical experience without reservation with everyone. [Click here to view the xiangyu baoyuan product series]
